transit_vehicle_maintenance_work

This data flow contains information on the maintenance work to be carried out an a transit vehicle. These will include but not be limited to change engine oil, change engine cooling water, add anti-freeze to engine cooling water, check transit vehicle operator's windshield washer system and top up if necessary, check engine fluid levels and top up if necessary, check vehicle battery levels and top up if necessary, check vehicle brakes and replace pads and/or top up fluid levels if necessary, carry out maintenance based on vehicle mileage, clean external of vehicle, clean interior of vehicle, check transmission state and top up fluid levels if necessary, and check vehicle running equipment (springs, dampers, muffler, etc.).

Sub Data Flows

• Primitive Element

Parent Data Flows

• transit_technician_work_assignment
• transit_technician_work_log

Associated PSpecs/Terminators

• None