1.2.5.3: Provide Parking Lot Operator Interface
This process shall provide the interface to a local parking lot operator that controls the use of the lot. The operator shall provide inputs of occupancy and/or the current lot state to this process. This process shall provide the operator with outputs that request a change to the lot state, which the operator shall implement by activating local dynamic message signs (DMS) and controlling the use of entry/exit barriers, and data about transit services that provide a park and ride operation to be output through local DMS. This process shall also provide the operator interface for commercial vehicle parking at a lot. This process shall receive inputs from the parking lot sensors and information devices to provide the operator with a picture of the status of the system.
This process is associated with the Parking Area Equipment physical object.
This process is associated with the following functional objects:
This process is associated with the following data flows:
- cv_parking_area_status
- cv_parking_lot_inputs
- dynamic_park_and_ride_area_information
- fpo-current_lot_state
- fpo-cv_parking_lot_inputs
- fpo-lot_occupancy
- fpo-parking_lot_hours_of_operation
- parking_information_device_control
- parking_information_device_status
- parking_lot_dynamic_data_operator_input
- parking_sensor_status
- tpo-change_lot_state
- tpo-cv_parking_area_status
- tpo-parking_lot_status