Transit Management Center --> Maint and Constr Management Center:
work plan feedback

Definitions

work plan feedback (Information Flow): Comments and suggested changes to proposed construction and maintenance work schedules and activities. This information influences work plan schedules so that they minimize impact to other system operations and the overall transportation system.

Transit Management Center (Source Physical Object): The 'Transit Management Center' manages transit vehicle fleets and coordinates with other modes and transportation services. It provides operations, maintenance, customer information, planning and management functions for the transit property. It spans distinct central dispatch and garage management systems and supports the spectrum of fixed route, flexible route, paratransit services, transit rail, and bus rapid transit (BRT) service. The physical object's interfaces support communication between transit departments and with other operating entities such as emergency response services and traffic management systems.

Maint and Constr Management Center (Destination Physical Object): The 'Maint and Constr Management Center' monitors and manages roadway infrastructure construction and maintenance activities. Representing both public agencies and private contractors that provide these functions, this physical object manages fleets of maintenance, construction, or special service vehicles (e.g., snow and ice control equipment). The physical object receives a wide range of status information from these vehicles and performs vehicle dispatch, routing, and resource management for the vehicle fleets and associated equipment. The physical object participates in incident response by deploying maintenance and construction resources to an incident scene, in coordination with other center physical objects. The physical object manages equipment at the roadside, including environmental sensors and automated systems that monitor and mitigate adverse road and surface weather conditions. It manages the repair and maintenance of both non-ITS and ITS equipment including the traffic controllers, detectors, dynamic message signs, signals, and other equipment associated with the roadway infrastructure. Weather information is collected and fused with other data sources and used to support advanced decision support systems.

The physical object remotely monitors and manages ITS capabilities in work zones, gathering, storing, and disseminating work zone information to other systems. It manages traffic in the vicinity of the work zone and advises drivers of work zone status (either directly at the roadside or through an interface with the Transportation Information Center or Traffic Management Center physical objects.)

Construction and maintenance activities are tracked and coordinated with other systems, improving the quality and accuracy of information available regarding closures and other roadway construction and maintenance activities.

Included In

This Triple is in the following Service Packages:

• MC08: Maintenance and Construction Activity Coordination

This triple is associated with the following Functional Objects:

• MCM Work Activity Coordination
• Transit Center Multi-Modal Coordination

This Triple is described by the following Functional View Data Flows:

• m_and_c_plan_feedback_from_transit

This Triple has the following triple relationships:

Communication Solutions

• (None-Data) - Secure Internet (ITS) (43)
• (None-Data) - Apache Kafka (44)
• (None-Data) - OMG DDS (44)
• (None-Data) - OASIS MQTT (50)
• (None-Data) - OASIS AMQP (61)

Selected Solution

(None-Data) - OASIS MQTT

Solution Description

ITS Application Entity Development needed			Click gap icons for more info.
Mgmt OASIS MQTT DMP	Facilities Development needed OASIS MQTT	Security IP Security Alternatives OASIS MQTT
	TransNet IP Alternatives Internet Transport Alternatives
	Access Internet Subnet Alternatives

Note that some layers might have alternatives, in which case all of the gap icons associated with every alternative may be shown on the diagram, but the solution severity calculations (and resulting ordering of solutions) includes only the issues associated with the default (i.e., best, least severe) alternative.

Characteristics

Security