Vehicle --> Connected Vehicle Roadside Equipment:
vehicle reported emissions

Definition
Included In
Communication Solutions
Characteristics
Security

Definitions

vehicle reported emissions (Information Flow): Current and average vehicle emissions data as measured by vehicle diagnostics systems and reported by the vehicle.

Vehicle (Source Physical Object): This 'Vehicle' physical object is used to model core capabilities that are common to more than one type of Vehicle. It provides the vehicle-based general sensory, processing, storage, and communications functions that support efficient, safe, and convenient travel. Many of these capabilities (e.g., see the Vehicle Safety service packages) apply to all vehicle types including personal vehicles, commercial vehicles, emergency vehicles, transit vehicles, and maintenance vehicles. From this perspective, the Vehicle includes the common interfaces and functions that apply to all motorized vehicles. The radio(s) supporting V2V and V2I communications are a key component of the Vehicle. Both one-way and two-way communications options support a spectrum of information services from basic broadcast to advanced personalized information services. Advanced sensors, processors, enhanced driver interfaces, and actuators complement the driver information services so that, in addition to making informed mode and route selections, the driver travels these routes in a safer and more consistent manner. This physical object supports all six levels of driving automation as defined in SAE J3016. Initial collision avoidance functions provide 'vigilant co-pilot' driver warning capabilities. More advanced functions assume limited control of the vehicle to maintain lane position and safe headways. In the most advanced implementations, this Physical Object supports full automation of all aspects of the driving task, aided by communications with other vehicles in the vicinity and in coordination with supporting infrastructure subsystems.

Connected Vehicle Roadside Equipment (Destination Physical Object): 'Connected Vehicle Roadside Equipment' (CV RSE) represents the Connected Vehicle roadside devices that are used to send messages to, and receive messages from, nearby vehicles using Dedicated Short Range Communications (DSRC) or other alternative wireless communications technologies. Communications with adjacent field equipment and back office centers that monitor and control the RSE are also supported. This device operates from a fixed position and may be permanently deployed or a portable device that is located temporarily in the vicinity of a traffic incident, road construction, or a special event. It includes a processor, data storage, and communications capabilities that support secure communications with passing vehicles, other field equipment, and centers.

Included In

This Triple is in the following Service Packages:

This triple is associated with the following Functional Objects:

This Triple is described by the following Functional View Data Flows:

vehicle_status_details_for_emissions

This Triple has the following triple relationships:

None

Communication Solutions

US: SAE J3067 (J2735 SE) - LTE-V2X WSMP (20)
US: SAE J3067 (J2735 SE) - WAVE WSMP (22)
(None-Data) - BTP/GeoNetworking/G5 (42)

Solutions are sorted in ascending Gap Severity order. The Gap Severity is the parenthetical number at the end of the solution.

Selected Solution

(None-Data) - BTP/GeoNetworking/G5

Solution Description

This solution is used within Australia and the E.U.. It combines standards associated with (None-Data) with those for V-X: BTP/GeoNetworking/G5. The (None-Data) standards include an unspecified set of standards at the upper layers. The V-X: BTP/GeoNetworking/G5 standards include lower-layer standards that support broadcast, near constant, low latency vehicle-to-vehicle and vehicle-to-infrastructure communications using the ETSI GeoNetworking Bundle over the 5.9GHz spectrum.

ITS Application Entity Development needed			Click gap icons for more info.
Mgmt ETSI 302 890-1 Addressed Elsewhere	Facilities Development needed	Security Bundle: ETSI ITS-S Security Architecture
	TransNet Bundle: GeoNetworking BTP
	Access Bundle: ETSI ITS-G5

Note that some layers might have alternatives, in which case all of the gap icons associated with every alternative may be shown on the diagram, but the solution severity calculations (and resulting ordering of solutions) includes only the issues associated with the default (i.e., best, least severe) alternative.

Characteristics

Characteristic	Value
Time Context	Recent
Spatial Context	Adjacent
Acknowledgement	False
Cardinality	Broadcast
Initiator	Source
Authenticable	True
Encrypt	True

Interoperability	Description
National	This triple should be implemented consistently within the geopolitical region through which movement is essentially free (e.g., the United States, the European Union).

Security

Information Flow Security
	Confidentiality	Integrity	Availability
Rating	Moderate	Moderate	Moderate
Basis	Contains PII describing the vehicle and its operating characteristics, which if observed could be used against the vehicle owner.	Applications relying on this data will not function properly if the data is incorrect, so it must be protected commensurate to the value of the application. Initially MODERATE, unlikely to be set to HIGH unless emissions operations are the highest priority.	Important for low emissions zone operations; without accurate and timely information, applications relying on this data will not function. While initially MODERATE, could be LOW if the priority for emissions-related applications are similarly low.

Security Characteristics	Value
Authenticable	True
Encrypt	True

Vehicle --> Connected Vehicle Roadside Equipment:vehicle reported emissions