Traffic Management Center --> Connected Vehicle Roadside Equipment:
restricted lanes application info

Definitions

restricted lanes application info (Information Flow): Restricted lane application configuration data and messaging parameters. This flow defines the location, duration, and operating parameters for lanes that are reserved for the exclusive use of certain types of vehicles (e.g., transit vehicles) or vehicles that meet other qualifications (e.g., number of occupants, low emissions criteria). It may also identify additional vehicles that may be allowed in the lanes as exceptions, though they don't meet specified criteria. It identifies the lane(s), the start and stop locations, start and end times, vehicle restrictions, speed limits and platooning parameters. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

Traffic Management Center (Source Physical Object): The 'Traffic Management Center' monitors and controls traffic and the road network. It represents centers that manage a broad range of transportation facilities including freeway systems, rural and suburban highway systems, and urban and suburban traffic control systems. It communicates with ITS Roadway Equipment and Connected Vehicle Roadside Equipment (RSE) to monitor and manage traffic flow and monitor the condition of the roadway, surrounding environmental conditions, and field equipment status. It manages traffic and transportation resources to support allied agencies in responding to, and recovering from, incidents ranging from minor traffic incidents through major disasters.

Connected Vehicle Roadside Equipment (Destination Physical Object): 'Connected Vehicle Roadside Equipment' (CV RSE) represents the Connected Vehicle roadside devices (i.e., Roadside Units (RSUs)) equipped with short range wireless (SRW) communications technology, as well as any other supporting equipment that leverage the RSU and are not described by other objects (e.g., a local roadside processor). CVRSE are used to send messages to, and receive messages from, nearby vehicles and personal devices equipped with compatible communications technology. Communications with adjacent field equipment and back office centers that monitor and control the RSE are also supported. This device operates from a fixed position and may be permanently deployed or a portable device that is located temporarily in the vicinity of a traffic incident, road construction, or a special event. It includes a processor, data storage, and communications capabilities that support secure communications with passing vehicles, other field equipment, and centers.

Included In

This Triple is in the following Service Packages:

• PT10: Intermittent Bus Lanes
• ST06: HOV/HOT Lane Management
• ST07: Eco-Lanes Management
• TM22: Dynamic Lane Management and Shoulder Use
• VS10: Restricted Lane Warnings

This triple is associated with the following Functional Objects:

• RSE Restricted Lanes Application
• TMC Restricted Lanes CV Application

This Triple is described by the following Functional View Data Flows:

• current_dynamic_lane_configuration_for_roadside
• vehicle_parameters_for_roadway_usage

This Triple has the following triple relationships:

Communication Solutions

• (None-Data) - Secure Internet (ITS) (43)

Selected Solution

(None-Data) - Secure Internet (ITS)

Solution Description

ITS Application Entity Development needed			Click gap icons for more info.
Mgmt Bundle: SNMPv3 MIB	Facilities Development needed	Security Secure Session Alternatives
	TransNet IP Alternatives Internet Transport Alternatives
	Access Internet Subnet Alternatives

Note that some layers might have alternatives, in which case all of the gap icons associated with every alternative may be shown on the diagram, but the solution severity calculations (and resulting ordering of solutions) includes only the issues associated with the default (i.e., best, least severe) alternative.

Characteristics

Security