ITS Roadway Equipment --> Connected Vehicle Roadside Equipment:
conflict monitor status

Definitions

conflict monitor status (Information Flow): A control flow that supports failsafe operation in the event that a conflict is detected that requires the RSE to enter a failsafe operating mode for intersection management. Analogous to a traffic signal conflict monitor, this flow is issued when differences are detected between information provided to the vehicle for in-vehicle display and information displayed by field devices. It contains the details of differences that were found.

ITS Roadway Equipment (Source Physical Object): 'ITS Roadway Equipment' represents the ITS equipment that is distributed on and along the roadway that monitors and controls traffic and monitors and manages the roadway. This physical object includes traffic detectors, environmental sensors, traffic signals, highway advisory radios, dynamic message signs, CCTV cameras and video image processing systems, grade crossing warning systems, and ramp metering systems. Lane management systems and barrier systems that control access to transportation infrastructure such as roadways, bridges and tunnels are also included. This object also provides environmental monitoring including sensors that measure road conditions, surface weather, and vehicle emissions. Work zone systems including work zone surveillance, traffic control, driver warning, and work crew safety systems are also included.

Connected Vehicle Roadside Equipment (Destination Physical Object): 'Connected Vehicle Roadside Equipment' (CV RSE) represents the Connected Vehicle roadside devices that are used to send messages to, and receive messages from, nearby vehicles using Dedicated Short Range Communications (DSRC) or other alternative wireless communications technologies. Communications with adjacent field equipment and back office centers that monitor and control the RSE are also supported. This device operates from a fixed position and may be permanently deployed or a portable device that is located temporarily in the vicinity of a traffic incident, road construction, or a special event. It includes a processor, data storage, and communications capabilities that support secure communications with passing vehicles, other field equipment, and centers.

Included In

This Triple is in the following Service Packages:

• ST08: Eco-Approach and Departure at Signalized Intersections
• TM04: Connected Vehicle Traffic Signal System
• VS13: Intersection Safety Warning and Collision Avoidance

This triple is associated with the following Functional Objects:

• Roadway Signal Control
• RSE Intersection Management
• RSE Intersection Safety

This Triple is described by the following Functional View Data Flows:

• roadside_signal_phase_indication

This Triple has the following triple relationships:

Communication Solutions

• US: NTCIP Traffic Signal - SNMPv3/TLS (5)
• (None-Data) - Secure Internet (ITS) (32)

Selected Solution

(None-Data) - Secure Internet (ITS)

Solution Description

ITS Application Entity Development needed			Click gap icons for more info.
Mgmt Bundle: SNMPv3 MIB	Facilities Development needed	Security Secure Session Alternatives
	TransNet IP Alternatives Internet Transport Alternatives
	Access Internet Subnet Alternatives

Note that some layers might have alternatives, in which case all of the gap icons associated with every alternative may be shown on the diagram, but the solution severity calculations (and resulting ordering of solutions) includes only the issues associated with the default (i.e., best, least severe) alternative.

Characteristics

Security