Physical Object: ITS Roadway Equipment

Roadway Multimodal Crossing Control

Overview

'Roadway Multimodal Crossing Control' monitors multimodal crossings and monitors and controls traffic control equipment in the vicinity of the crossing. Equipment controlled includes warning lights, gates, dynamic message signs, and other systems associated with multimodal crossings. It manages draw bridges and miscellaneous other crossings between highway traffic and other modes. Railroad grade crossings are covered by other functional objects.

This functional object is included in the "ITS Roadway Equipment" physical object.

This functional object is included in the following service packages:

This functional object is mapped to the following Functional View PSpecs:

Requirements

# Requirement
01 The field element shall include sensors to monitor requests from non-highway traffic to cross at multimodal crossings for specified durations (such as draw bridges and miscellaneous other interference crossings between highway traffic and other modes such as river traffic, aircraft, etc.); the sensors are under center control.
02 The field element shall include signals to control traffic at multimodal crossings on surface streets, under center control.
03 The field element shall include driver information systems (such as dynamic messages signs, highway advisory radios (HAR), and equipment that controls warning lights and gates) that advise drivers at multimodal crossings, under center control.
04 The field element shall provide operational status for the sensors, signals, and driver information systems equipment at multimodal crossings to the center.
05 The field element shall provide fault data for the sensors, signals, and driver information systems equipment at multimodal crossings to the center for repair.
06 The field element shall forward all requests for right-of-way at multimodal crossings to the controlling center.

Information Flows

Source Flow Destination
Connected Vehicle Roadside Equipment roadway dynamic signage data ITS Roadway Equipment
ITS Roadway Equipment driver information Commercial Vehicle Driver
ITS Roadway Equipment driver information Driver
ITS Roadway Equipment driver information Emergency Personnel
ITS Roadway Equipment driver information Light Vehicle Driver
ITS Roadway Equipment driver information Maint and Constr Vehicle Operator
ITS Roadway Equipment driver information Transit Vehicle Operator
ITS Roadway Equipment highway control status Multimodal Crossing Equipment
ITS Roadway Equipment right-of-way request notification Traffic Management Center
ITS Roadway Equipment roadway dynamic signage status Connected Vehicle Roadside Equipment
ITS Roadway Equipment roadway dynamic signage status Maint and Constr Management Center
ITS Roadway Equipment roadway dynamic signage status Maint and Constr Vehicle OBE
ITS Roadway Equipment roadway dynamic signage status Traffic Management Center
ITS Roadway Equipment signal control status Traffic Management Center
ITS Roadway Equipment signal fault data Traffic Management Center
Maint and Constr Management Center roadway dynamic signage data ITS Roadway Equipment
Maint and Constr Vehicle OBE roadway dynamic signage data ITS Roadway Equipment
Multimodal Crossing Equipment multimodal crossing status ITS Roadway Equipment
Traffic Management Center roadway dynamic signage data ITS Roadway Equipment
Traffic Management Center signal control commands ITS Roadway Equipment

Standards

The following table lists the standards associated with the functional object itself (as opposed to standards associated with an interface).

Name Title
ITE ATC Advanced Transportation Controller
ITE ATC API Application Programming Interface Standard for the Advanced Transportation Controller
ITE ATC Model 2070 Model 2070 Controller Standard
NEMA TS2 Traffic Controller Assemblies Traffic Controller Assemblies with NTCIP Requirements
NEMA TS4 Hardware Standards for DMS Hardware Standards for Dynamic Message Signs (DMS) With NTCIP Requirements