Physical Object: Commercial Vehicle Check Equipment
CVCE Weigh-In-Motion
Overview
'CVCE Weigh-In-Motion' measures and records axle weights and gross vehicle weight without requiring the vehicle to come to a stop. Both permanent and portable installations are supported and may be performed in conjunction with electronic clearance or as a separate application.
This functional object is included in the "Commercial Vehicle Check Equipment" physical object.
This functional object is included in the following service packages:
This functional object is mapped to the following Functional View PSpecs:
Requirements
# | Requirement |
---|---|
01 | The roadside check facility equipment shall detect the presence of commercial vehicles and freight equipment approaching a facility. |
02 | The roadside check facility equipment shall request and input electronic screening data from the commercial vehicle's electronic tag data. |
03 | The roadside check facility equipment shall send a pass/pull-in notification to the commercial vehicle and its driver based on the information received from the vehicle and the measurements taken. The message may be sent to the on-board equipment in the commercial vehicle or transmitted to the driver using equipment such as dynamic message signs, red-green lights, flashing signs, etc. |
04 | The roadside check facility equipment shall differentiate between different types of commercial vehicles, including number of axles, presence of containers, and types of connected freight equipment. |
05 | The roadside check facility equipment shall determine the gross vehicle weight, weight per axle, and the identification of a passing commercial vehicle and its cargo. |
Information Flows
Standards
Currently, there are no standards associated with the functional object itself though the interfaces may have standards associated with them.